• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Best Conical Burr Coffee Grinders

It is possible to make your morning coffee better by grinding your own beans. There are a lot of different grinders on the market.

This OXO grinder makes use of conical burrs to produce an excellent grind for drip, French press and espresso. This grinder is a great option for novices, however, the most dedicated coffee enthusiasts will require an even more precise grind.

OXO Brew

You're probably aware if you make your own coffee that a good grinder is required to achieve the most flavor. A high-quality burr mill grinder mill could cost up to $200, which is expensive for those who don't know whether they'll utilize it. The OXO Brew is an excellent choice for anyone looking to enjoy freshly ground coffee without having to spend hundreds of pounds.

The design of the OXO Brew isn't extravagant, but it looks sturdy and expensive. Its stainless steel body is fitted with a permanent water tank at the back and an insulated thermal carafe in the front. The carafe and tanks are designed so that the body is easily fit into smaller kitchens. The controls are concealed beneath the carafe, which reduces the amount of clutter. There is also a light to let you know when it's heating or brewing.

In our tests in our tests, the Oxo produced consistently. The temperature of the water was within a small range (197.4 F to 205.0 F) for the entire test, as measured by thermocouples located in the basket for the grounds. Its brewing time was also close to the time that the Specialty Coffee Association recommends for a good drip.

Another benefit of the OXO Brew is it comes with one-serve functionality that allows you to pour your coffee directly into your mug. This feature isn't present on other high-end models. It's a great benefit for those who prefer to make individual portions of their coffee but don't like the hassle of making an entire carafe.

The only downside to the OXO is that it has no clock or automated start time. This could be a problem if you are on a tight schedule. Furthermore the water tank could be difficult to get rid of, as it has a lid that must be lifted off to access the reservoir. It is equipped with a mineral descaler that helps to prevent mineral deposits from accumulating inside the machine.

Baratza Encore ESP

If you're a lover of ceramic coffee grinder and are looking for the best Conical burr grinder burr grinder the Baratza Encore is your best coffeee grinder choice. This version of the original Encore is redesigned with upgrades that make it more compatible with a wider range of brewing methods and offer greater flexibility than ever before. It's designed for beginners in home baristas as well as anyone who wants to keep their options for brewing open with a single grinder. It comes with step-up grind adjustments and easy controls for beginners, along with labeled and notched settings to ensure consistency. The M2 burrs guarantee uniform grinds, and the hopper has a new quick release feature that makes cleaning easy.

The ESP makes use of a DC motor that has high torque and gear reduction, much like the original Encore. However, it runs at lower speeds in order to reduce heat and static charge. It's also quieter than classic Encore, and it has a new metal plate which improves stability and consistency. It is equipped with conical burrs of 40 millimeters similar to those that are found in the more expensive Virtuoso plus. This allows it to achieve a better grind size distribution and more consistent shots.

The ESP grind adjustment has 9 microns between each step, ensuring excellent resolution for espresso and pour over. It has a new dosing cup that is compatible with both 54 and 58 mm portafilters which improves the ergonomics of manual dosing. The grinder can be used with the traditional grounds bin for those who prefer a hopper-based workflow.

One disadvantage of the ESP is its inconsistency when it comes to back-to-back consistency tests however, it still performs better than many other grinders in this price range. The stepped grind settings are also inconsistent, making it hard to find the perfect setting for your style of brewing. The ESP is a versatile brewer that can be used for different brewing methods.

The Encore ESP is also a little more expensive than some of the other models on this list, but it's well worth the extra cost due to its amazing versatility. It can grind for filter and espresso coffee grinder brews. The shims included will maximize its performance for Pour Over making.

Baratza DF64

The Baratza DF64 grinder is a good one that works well for pour-over brewing and espresso. The burrs can be upgraded to enhance performance, and the hopper is big enough to accommodate a variety of grind sizes. The DF64 is also easy to operate and maintain with a minimal number of moving parts. It is an excellent choice for anyone looking for a high-quality grinder at an affordable price.

The DF64 Gen 2 is a significant improvement over the initial version and should be difficult to be beaten by any other grinder in the same price range. The new model is more attractive to the eye. It features a simple, flat, rounded base that can hold up to 20 grams of beans at a time and a single dose cradle. It also comes with a rubber hose that forces air through the grinder to push out any excess grinds.

One of the major problems with the original DF64 was popcorning, which is when coffee beans bounce upward out of the burrs instead of grinding down. This is a common problem with hopper-based grinders that can affect the consistency of your grind. The new DF64 has a much-improved anti-popcorning system that eliminates this problem.

Other issues with the DF64 included a poor quality build, a loose design that caused gaps around the edges of the hopper, a heavyweight, a mandatory use of bellows, regular alignment challenges, a plastic adjust collar that mis-threaded easily, vinyl wrap instead of powder coating, and the all-but-mandatory need for two aftermarket upgrades (anti-popcorning, declumper). The DF64 Gen 2 addresses these issues and many more.

The DF64 has a powerful 250W motor that spins the burrs at about 1,400 RPM. This is a little faster than the Encore ESP, but it’s still slower than other popular burr grinders like the Mahlkönig EK43. The DF64 is also less noisy than the Encore ESP, making it easier to work with in a busy cafe environment.

The DF64 has an easy-to-read, step-by-step adjustment system that allows you to fine-tune your grind size for different brewing methods. It also comes with a wide selection of burrs, which makes it possible to experiment and find the perfect grind for your particular coffee bean. The DF64 also has a convenient dosing system, which allows you to direct the ground coffee directly into your portafilter or mug.
Fellow Ode

A popular maker of home coffee equipment, Fellow makes some seriously aesthetically appealing gear. Their kettles, French presses, and other home coffee brewing machines have an elegant and modern matte finish that suits any kitchen aesthetic. With this in mind, it should be no surprise that their grinders organic coffee beans look equally as good. The Ode is a sleek and compact grinder with a number of easy-to-use features designed for precise, single-dose brewing.

The Ode is unique among coffee grinders because it uses flat burrs, rather than conical ones. Usually, you only see flat burrs on professional or commercial grinders due to their ability to reduce grind time and heat generation and improve grind particle consistency. The 64mm flat burrs in the Ode also give it a much smoother grind than you would find in a typical home appliance grinder. And they are designed with single-dosing in mind, meaning that the grinder shuts off as soon as the hopper is empty. This helps to prevent over-grinding, which can rob your brews of flavor and aroma.

The hopper itself holds 100 grams, which is enough for one large pour-over or two small cups of espresso. The Ode has a variety of other neat features, including a built-in scale and a cool grind size chart that is mapped out on the underside of the lid. This shows the brewing methods that each setting is most suitable for, with pour-over and cold brews on the fine end of the range, and French press on the coarse end.

Another great feature of the Ode is that it has a quiet, almost purr-like sound during operation and is very fast. The grinder has a high-force spring that knocks excess ground beans and chaff into the catch, which helps to reduce grind retention and make clean-up a breeze. It’s also very easy to disassemble and is compatible with coffee tablet cleaners.

Despite some minor hiccups in the initial launch, the Ode is still a top contender for those looking for an excellent and aesthetically pleasing conical burr grinder. Fortunately, the company is committed to improving the product and recently released the Gen 2 version, which addresses some of the issues with the original. However, for those who want a better-suited grinder for espresso, the Baratza DF64 is an excellent alternative that is both visually and functionally superior to the Fellow Ode.